What are the working principles of electric water heaters? Electric water heater tips

The market has been selling a variety of water heaters, then friends have always liked which kind of water heaters you want to buy? Now Xiaobian will tell friends about how to make electric water, first of all, friends know about some electric water heaters The principle is all, because only we understand the working principle of this electric water heater can know how to choose to buy, and how to use this electric water heater.

First, what are the working principles of electric water heaters?

1. This type of water heater is heated and not heated by the on and off of the thermostat. Generally speaking, the concept of insulation is short-time heating. When heating, the rated power of the water heater is still used. After the circuit is connected, if the water temperature is lower than 50 °C (most brand set critical temperature), the thermostat is automatically turned on, the water heater is heated at the beginning, and the water temperature reaches the preset temperature of the water heater (most brands are 75 ° C ~ 85 ° C When the thermostat is turned off, the water heater stops heating.

2, we have been talking about this insulation is complete with the insulation layer of the water heater completely, with the water temperature falling from time to time, until less than 50 degrees, the water heater starts to heat again. This cycle reciprocates and completes the so-called heat preservation. When the amount of heat preservation lamp is used, the water heater does not consume electricity, which is close to the theoretical zero power. When heating, the water heater uses the rated power. It is necessary to understand the uniform work of the water heater when it is insulated. Consumption, you can see the national norms

Second, what are the tips for using electric water heaters?

1. When the electric water heater is used, the power indicator light is on, indicating that it is being heated. When the water temperature reaches the set value, the indicator light is off, indicating that the power is turned off. When the indicator is on, the indicator is on and the indicator is on.

2, the electric water heater must first be filled with water and then energized and heated before being used. If the water source pressure drops or suddenly stops, it is best to turn off the power.

3. Each type of electric water heater is equipped with a faucet and is installed with a reflow. Usually, "blue" means cold water, and "red" means hot water. When using, unscrew the "red," faucet, there is hot water out. At this time, if the water temperature is too high, you can unscrew the "blue" faucet at the same time, and adjust the water volume to get the hot water.

4, electric hot water has a temperature regulator with water temperature mark scale, such as "I", "II", "III" or mark English, Arabic numerals indicate low temperature, medium and high conditioning position, the temperature adjustment knob Aligning a sign, the water temperature of the water heater will adhere to the temperature set in the gear indication.

5, in the application process, let the water spill out and try to practice the water temperature, then stop the shower, avoid the water temperature is too high and burn people's skin.

After reading our article, I know that there is an electric water heater in this water heater. The working principle of the electric water heater is also known. What other friends' information on home appliance decoration is better? Please continue to pay attention to our decoration home network.

More related wonderful reading:

What is the working principle of the electric water heater? How to use electric water heater

What is the principle of electric water heater? Analysis of working principle of electric water heater

What is the working principle of electric water heater? Is it safe for household electric water heater?